E-liquid label requirements in the UK: a practical guide for 2026

Date Posted:16 November, 2026

Sector: E-liquid

Drifter Bar Salts

A 10ml e-liquid bottle is one of the busiest bits of packaging there is. It has to carry a health warning, an ingredients list, nicotine content, a batch number, CLP hazard information and a tactile warning, and it still has to look like your brand. In 2026 there’s also a duty stamp to make room for, and plain packaging proposals on the horizon.

We’ve been printing labels for e-liquid brands since 2014, so here’s a plain-English run-through of what your labels and packs need today, what’s changed this autumn, and how to plan for what may come next.

This guide is a practical overview, not legal advice. Your regulatory adviser or Trading Standards should always have the final say on your artwork.

What every e-liquid label or pack needs under TRPR

Nicotine-containing e-liquids sold in the UK fall under the Tobacco and Related Products Regulations 2016 (TRPR). Regulation 37 says each unit packet, and any container pack around it, must include:

  • a list of all ingredients, in descending order by weight

  • the nicotine content and the delivery per dose

  • the batch number

  • a recommendation to keep the product out of reach of children

  • the health warning: “This product contains nicotine which is a highly addictive substance”

That warning has strict rules of its own. It must appear on both the front and back surfaces, cover 30% of each surface, and be set in black Helvetica bold on a white background, centred in its space and parallel to the main text. Each unit packet also needs a leaflet covering use and storage, contra-indications, risk-group warnings, possible adverse effects, addictiveness and toxicity, and the producer’s contact details.

Behind all of that sit the TRPR product rules: refill containers of no more than 10ml, nicotine strength of no more than 20mg/ml, child-resistant and tamper-evident packaging, and notification to the MHRA before a product can be sold.

Bottle or box: where does the information go?

The government’s labelling guidance for Great Britain is useful here. If a bottle is sold on its own with just a leaflet attached, the TRPR information has to go on the bottle. If the bottle goes into a carton or sleeve, that carton becomes the unit packet and carries the TRPR labelling; the bottle doesn’t have to, although most brands still put enough on it to identify the product and use it safely.

That choice has a big effect on how hard your bottle label has to work, and it’s worth deciding early.

CLP hazard labelling and tactile warnings

TRPR isn’t the only set of rules. Nicotine e-liquids are also chemical mixtures under GB CLP, and the classification usually depends on strength. Business Companion (the Trading Standards guidance service) gives the usual position as:

  • over 1.7% nicotine: classified as Toxic

  • between 0.49% and 1.7%: classified as Harmful

  • under 0.49%: not classified

So a 20mg/ml (2%) liquid is normally Toxic, while 12mg/ml and 6mg/ml are normally Harmful. Your chemist should confirm the classification for each formulation, as other ingredients can change it.

Once a product is classified, the label needs the CLP elements: product identifier, hazard pictogram, signal word (“Warning” or “Danger”), hazard and precautionary statements, supplier details and nominal quantity. It also needs a tactile warning of danger to BS EN ISO 11683 on the bottle itself, so blind and partially sighted people know they’re handling something hazardous. The guidance is clear that the tactile warning goes on the primary pack, not on a removable surface or an outer carton.

We produce tactile warning labels in-house, either built into your printed label or as stock tactile warnings, which saves juggling an extra supplier.

New for October 2026: vaping duty stamps

Vaping Products Duty came into force on 1 October 2026, charged at £2.20 per 10ml of vaping liquid, whether or not it contains nicotine. Alongside it came the Vaping Duty Stamps scheme, and that’s where packaging comes in.

According to HMRC’s guidance:

  • the stamp is a rectangle, 18mm wide by 42mm long

  • it must go on the outermost retail packaging, the carton, or the bottle if there’s no carton

  • it must seal the packaging, so the product can’t be opened without damaging the pack or the stamp

  • from 1 January 2027 only digital stamps may be applied to new products

  • from 1 April 2027 all vaping products outside duty suspension must carry a stamp

Stamps come only from HMRC’s appointed supplier to approved businesses, so they aren’t something a label printer supplies. What we can help with is the packaging around them. If your artwork was designed before this autumn, check there’s a sensible, clear area for the stamp that doesn’t cover the health warning, the CLP panel or anything else that must stay visible. On cartons, think about where the stamp will sit across the opening so it does its sealing job.

What plain packaging could mean for your labels

The Tobacco and Vapes Act received Royal Assent on 29 April 2026. The consultation on packaging, appearance and display ran from 10 July to 2 October 2026, and proposals for vaping products included:

  • plain white packaging, with restrictions on text colour, imagery and branding

  • standardised safety information on packs

  • flavour names limited to simple descriptions such as “apple”, with concept, confectionery, dessert and alcohol names banned

None of this is in force yet. The government has said it will publish its response in due course, and the final rules may look different. But it’s a good reason to be careful about how much stock you hold.

Planning your e-liquid labels for the next 12 months

A few practical steps we’d suggest:

  1. Don’t over-order. With duty stamps bedding in and packaging rules under review, a warehouse full of labels you can’t use is an expensive problem. We don’t have minimum order quantities, so you can order closer to what you need. Larger runs still bring the unit price down, so it’s a balance worth talking through.

  2. Keep your SKUs flexible. Digital printing handles lots of flavours and strengths in one job and makes artwork changes far easier when the rules move.

  3. Use peel & reveal for space. Our peel & reveal labels go up to seven printable pages in one footprint, handy for leaflet-style content, extra languages or CLP text on a 10ml bottle. Check with your adviser what may sit under the peel.

  4. Decide bottle versus carton early. It shapes where the TRPR wording goes and where the duty stamp will sit.

  5. Get your artwork checked. Our artwork team checks every file before it’s printed, and we’ll flag anything that looks tight on space, though compliance sign-off stays with you and your adviser.

Talk to us about your e-liquid labels

Whether you need 10ml labels, shortfill labels, tactile warnings, peel & reveal or printed cartons, everything is produced in-house by our team in Bourne, Lincolnshire. You’ll deal with real people who know the sector and take ownership of your work.

Give us a call or complete our online quote form to get started, and we’ll guide you through the process, from artwork approval to printing and delivery.

Sources used (checked 16 November 2026)